The Cheltenham Woodgrain

APCCHELTWOOD
For Prices Use Selection Box
A traditional pitched canopy available with terracotta or grey tiles.
It has a fully moulded whitegrain or woodgrain planked soffit and fascia.
Standard are whitegrain or woodgrain brackets.
Options are available for that extra finishing touch.
Fleur de Lys or inverted T-bar can be added.
Only available in single door size, 1520mm wide overall.
Arched brackets.

Click More Information To View Options 

 
Cheltenham 730 & 880
Door Canopy

A traditional pitched door canopy available with terracotta or grey tiles. It has a fully moulded white grain or wood grain planked soffit and fascia. Standard are white grain or wood grain brackets.
Options are available for that extra finishing touch. Fleur de Lys or inverted T-bar can be added.
Only available in single door size, 1520mm wide overall.
 


Complete with GRP brackets (BRG6)

Terracotta Tiles


Complete with GRP brackets (BRG7)

Grey Tiles


Shown with Fleur de Lys option

 

Cheltenham 730 & 880
Door Canopy

A traditional  over door canopy with a clay tile design in a choice of terracotta or slate-grey finish. Fully detailed wood grain soffit and fascia.

Included are GRP brackets
(BR6 or BRG7)

All canopies come with a fitting kit and instructions.
 

 

 Transforms And Protects Any Doorway
• Made In Strong Rigid Fibreglass
• Beautiful Moulded Design
• Fitted In Minutes, Not Hours
• Totally Maintenance-Free
• Available In White grain & Wood grain
• Delivery Within 7 Days
• Fully Guaranteed

Standard Fitting Instructions for Over door Canopies
  • Mark out and pre-drill 6mm holes at approx 300mm centres along the door canopy flanges (some canopies may have a tray and lid assembly).
     
  • Offer canopy up to the wall and centralise it above the door opening. Mark off the position on the wall for the bracket assembly (if brackets are to be fitted). Make sure you markings are straight and level.
     
  • Offer the bracket up to the wall at each side of the door opening. Drill and plug the wall using a 7mm masonry drill bit. Screw the bracket to the wall using 3" screws and plugs supplied.
  • Lift the canopy onto the brackets and centralise over the door opening. Drill and plug the wall as before, this time using 2"screws and plugs supplied.

    Cover all visible screw heads with the appropriate coloured screw caps.

    Clean canopy using soap and water or a non-abrasive cleaner.

    Seal canopy to the wall using and appropriate colour sealer. (Sealer is not supplied).

    Your over door canopy is maintenance-free, however we recommend regular cleaning with soap and water to maintain it's good looks for many years to come.

Please check your canopy for damage when its delivered we insure these products in transit you are covered until you sign for them.

!
 <<