Master Plastics (SW) Ltd

Quality Building Products for the Home & Garden

Premier Curved Dome and Kerb

Complete roof dome and kerb for new and existing roofs
Domes and kerbs are supplied on this page as a complete kit. Optional openers are available on the bottom of the page.
Supplied with curved single double or triple skins in Clear Opal or Bronze Tinted finishes. see drop down boxes for options and prices.
These items are made to order delivery will take approx 28 days.
All sizes quoted are internal day light sizes, prices are for unvented domes please call us for a price on the vented models.
Domes and kerbs need to be ordered for a complete kit. Triple skin domes should be used to comply with building regs single and double skins are suitable on sheds and garages
All roof dome are manufactured to order returns are not permitted so please check your sizes before ordering.

600 x 600 Curved Dome and Kerb

Roof opening 600mm x 600mm

750 x 750 Curved Dome and Kerb

Roof opening 750mm x 750mm

900 x 600 Curved Dome and Kerb

Roof opening 900mm x 600mm

900 x 900 Curved Dome and Kerb

Roof opening 900mm x 900mm

1200 x 600 Curved Dome and Kerb

Roof opening 1200mm x 600mm

1200 x 900 Curved Dome and Kerb

Roof opening 1200mm x 900mm

1050 x 1050 Curved Dome and Kerb

Roof opening 1050mm x 1050mm

1200 x 1200 Curved Dome and Kerb

Roof opening 1200mm x 1200mm

1800 x 1200 Curved Dome and Kerb

Roof opening 1800mm x 1200mm

Manual Roof Light Opener

Manual Linear Drive use the drop down box for prices

Order with roof lights you must select the same size manual openers as the roof domes ordered. These kits are only designed for our range of domes there are not suitable for any other types of roof. (prices are for openers only they do not include roof domes or kerbs

3.0m handle

OP-POLE3M

Use with telescopic opener 3.0m long

Electric Roof Light Opener

Electric Linear Drive use the drop down box for prices

Order with roof lights you must select the same size electric openers as the roof domes ordered. These kits are only designed for our range of domes there are not suitable for any other types of roof. (prices are for openers only they do not include roof domes or kerbs) prices are for the electic openers only you will also need switches and fuse boxes (control units with rain sensors etc can also be used) we do not supply these parts.
This product should be installed by a qualified electrician

Electrical Control System For The Powered Opener.

DPCS

Electrical control system with rain sensor and remote control for use with powered roof domes.

Use with powered openers

Full Roof Access Hatch

Access Kit use the drop down box for prices

Order with roof lights you must select the same size access kit as the roof domes ordered. These kits are only designed for our range of domes there are not suitable for any other types of roof.light (prices are for openers only they do not include the roof domes or kerbs).

Sorry theses kits are only suitable with the sizes in the drop down box

Installation instructions – Access Hatch

Kerb

· Place kerb over roof opening and fix through foot of kerb using the 55mm fixings supplied, making sure the fixings have a secure base

· A table for the quantity of fixings required per side is shown below:

No. of fixings	Length of side (mm)
2	600 / 750 / 900
3	1050 / 1200
4	1350 / 1500
5	1650 / 1800 / 2400

· Install roofing membrane as specified in the manufacturer’s instructions. Preferred details for installing the most common roofing types to the mardome kerb are illustrated on the label attached to the kerb

· For improved weathering, the roof covering cap sheet can be terminated horizontally on the top surface of the kerb. Care must be taken to minimise the build up of material on this surface. It is recommended that the membrane is mitred (rather than lapped) on the top surface at the corners to provide a flat surface for the rooflight to seal to

Dome / Pyramid

Place the opening dome assembly squarely on the kerb. Holding the dome open to 90° (important - no more than 90°, as overextending the opening can damage the dome), use a powerdriver fitted with the T25 bit supplied to drive the 75mm fixings through the recess in the lower uPVC frame and into the kerb. (If installing to a timber upstand, use the 95mm fixing.) Space the fixings evenly around the frame (max 300mm centres) and ensure they are kept vertical during their installation.

Disconnecting the Stays

It may be necessary to disconnect the stays in order to gain access for the installation of the fixings on the hinged side of the dome. Rotate the knob and pull it out to release the lower end of the stay. It is important that the dome is then opened no more than 90° as overextending the opening can damage the dome.

Remember the stays must be reconnected once the fixings are in place

Roof Lanterns

	Roof Lanterns - Continuous Rooflights A range of roof lanterns glazed with glass or polycarbonate which enable the specifier to incorporate a design feature which is truly beneficial to the character value and environment of the building. Each lantern flat roof dome is manufactured to individual project requirements and can be supplied to any length.
Buy Now Save 2.5%

Flat Roof Stainless Steel Railings

	New Flat Roof railings A range of roof stainless steel railings which enable the specifier to incorporate a design feature which is truly beneficial to the character and environment of the building. Available in four colours with optional lights a simple strong and versatile steel railings system built with stainless steel posts and aluminium rails for a maintenance free finish..
Buy Now Save 2.5%

Telephone Orders

We are happy to take your order or enquiry by phone

Please call us on 0117 971 9922

We are open 8am - 5pm Monday to Friday & Saturdays 8am - 12pm

Many of the images on this site do not belong to us. Do not copy or link directly to them. Contact us so we can seek permission where necessary on your behalf.

WE DELIVER UK NATIONWIDE ENGLAND SCOTLAND WALES AND IRELAND..