Polycarbonate Glass Clear Roofs
acrylic_sheet
You can use these sheets to form glass clear roof and canopies.

The maximun spacing for these types of sheets should not exceed 600mm.

Sheets can be cut to size with a fine tooth saw hand held or electric ensure you have the sheets on a smoth flat clean surface before cutting.

!

3mm - Clear x 2.0m
PCS2.050X595X3MMC
!
Solid Polycarbonate Sheet Clear
Solid polycarbonate sheet 3mm thick

2m x 595m

3mm - Bronze x 2.0m
PCS2.050X595X3MMB
!
Solid Polycarbonate Sheet Bronze
Solid polycarbonate sheet 3mm thick

2m x 595m

3mm - Clear x 2.4m
PCS2.4X600X3MMC
!
10% Off this size sheet when you buy 3 or more sheets limited stocks.
Solid Polycarbonate Sheet 3mm Clear
Solid polycarbonate sheet 3mm thick clear

2.4m x 600mm

3mm - Bronze x 2.4m
PCS2.4X600X3MMB
!
10% Off this size sheet when you buy 3 or more sheets limited stocks.
Solid Polycarbonate Sheet 3mm Bronze
Solid polycarbonate sheet 3mm thick clear

2.4m x 600mm

3mm - Clear x 3m
PCS3.0X600X3MMC
!
Solid Polycarbonate Sheet Clear
Solid polycarbonate sheet 3mm thick

3m x 600m

3mm - Bronze x 3m
PCS3.0X600X3MMB
!
Solid Polycarbonate Sheet Bronze
Solid polycarbonate sheet 3mm thick

3m x 600m

2.5m Rafter Bar
!
aluminium_capped_rafter_bar

Can be used with all types of polycarbonate roof sheets solid and twin wall from 3mm upto 40mm thick.

A gasket is used under the sheets for the glazing to sit on then cap half of the bar is then screwed in to place

3.0m Rafter Bar
!
aluminium_capped_rafter_bar

Can be used with all types of polycarbonate roof sheets solid and twin wall from 3mm upto 40mm thick.

A gasket is used under the sheets for the glazing to sit on then cap half of the bar is then screwed in to place

4.0m Rafter Bar
!
aluminium_capped_rafter_bar

Can be used with all types of polycarbonate roof sheets solid and twin wall from 3mm upto 40mm thick.

A gasket is used under the sheets for the glazing to sit on then cap half of the bar is then screwed in to place

6.0m Rafter Bar
!
aluminium_capped_rafter_bar

Can be used with all types of polycarbonate roof sheets solid and twin wall from 3mm upto 40mm thick.

A gasket is used under the sheets for the glazing to sit on then cap half of the bar is then screwed in to place

White Cup and Cap
WWCSTANDARD
!
Fits 8 and 10 Screws pack 10

Edge Trim
SM3MME
!
3 mm edge trim to finish edges of sheets to hide cuts around edges tops and bottom 2.4 metre lengths
!

Telephone Orders

We are happy to take your order or enquiry by phone

Please call us on 0117 971 9922

We are open 8am - 5pm Monday to Friday & Saturdays 8am - 12pm

© Copyright 1994-2007, Master Plastics (SW0 Ltd Bristol | Clevedon. All rights reserved world-wide.

Many of the images on this site do not belong to us. Do not copy or link directly to them. Contact us so we can seek permission where necessary on your behalf.

WE DELIVER UK NATIONWIDE ENGLAND SCOTLAND WALES AND IRELAND..